The set contains a diamond selector and a moissanite tester. One of the greatest challenges gem dealers, buyers and gemologists face today is being able to accurately determine the real and authentic. Reconnect the hoses and turn the water supply back on.DIAMOND TESTER / SELECTOR + MOISSANITE Tester with UV Lights.Place the filters back into the unit, pushing them in.Clean and rinse the filters if necessary.Using needle nose pliers, remove the filters.Ensure to have a bucket available to drain the remaining water in the hoses. Remove the inlet hoses from the back of the washer.Check that the water inlet filters are not clogged with sediments:.If the water supply pressure is more than 116 psi, a pressure reducing valve must be installed. The recommended water supply pressure must be between 14.5 psi and 80 psi (100~552 kPa). Make sure there is appropriate water pressure and that the faucets are fully opened.Water hoses are kinked, pinched, or crushed:.Verify that the faucets are fully open at the source:.The IE error code indicates a problem with the water supply. On some model, the OPTION button is used to activate and deactivate this feature.īut if the keys are unresponsive and child lock is not engaged, a repair service may be required to resolve the issue. Child Lock is usually turned on and off by pressing either the PRE-WASH or TUB CLEAN key for 3 seconds. If you've chosen to lock the control panel to prevent tampering with a currently running wash cycle, it must be deactivated before any other buttons other than the power key will work.
The CL message means that the child lock feature is currently engaged. For example, on some models steam can not be activated with water plus.īut if the unit powers on, but none of the buttons respond, the unit may require a repair service. Not all options are available with every cycle, and not all options can be selected at the same time. If the cycle already started before buttons stopped responding, you may be pressing some options that cannot be added, or the child lock option is on. Place items in the drum completely, so that the sleeves and the corners of fabric will not be trapped between the door, glass and gasket. By putting much strain on the door hinge can cause a misalignment. The drum can be fully loaded, but make sure that it is not tightly packed this can force the door out of alignment.Īvoid putting weight on or pushing down on the door while it's opened. To prevent future occurrence of the dE error: With the power being disabled, press and hold the START/PAUSE button for 5 seconds. Note: If you cannot unplug the washer, power the washer OFF, and trip the circuit breaker. A dE error code means the washer is unable to lock it's door.
0 kommentar(er)
